Durostone

Industrial flooring systems

Liquidur installation guide

 

Istallation guide for liquid conrete densifyer and hardener

APPLICATION


In case of fresh concrete the optimum effect can be achieved at least 72 hours after fi nishing the concrete. It is suggested that LIQUIDUR is applied with spray equipment. However brush or roller can be used too but it must be ensured that no puddles formed. After application, it is recommended to spread the material evenly by a soft mop or microfi ber pad. This process breaks the liquid’s surface stress and supports absorption. Ensure that the surface remains wet and overall shiny for at least 10-15 minutes. Where the surface dries faster, i.e. at higher porosity spots or near edges additional material should be applied. Then let the product dry on the surface. In case of existing concrete remove all dirt oil, grease and loose particles. Very porous surface can be wetted by water before the application of the product. The effect of the product can be enhanced by using second layer. In case of two layers do not let the first layer to dry completely.


CLEANING

The equipment and tools should be cleaned with water immediately after use. fIrst tIme Use The surface can be utilized after drying (1-3 hrs) however the benefi cial properties develop fully after 7 days. In regards to loading of the floor, please follow the guidelines of the concrete fl oor itself. After 3-7 days the floor can be painted or any additional layers may be applied. maIntance

After application of LIQUIDUR – in opposition to other materials – the surface and aesthetic appearance of the floor will be better and better over the time and the top appearance will remain until the lifespan of the floor. Thus, the repetitive application of the material is not required. Because of this treatment, the dust and other residue will not stick into the pores of the floor, basically the cleaning process becomes effortless. Maintain your floor by daily cleaning, using large quantities of water and floor cleaning detergents. Preferably use a neutral detergent.


Legal notice: This technical datasheet and installation guide are based in laboratory results and our experiments. The amount of material used and the given application process can be affected by the specifi c construction conditions. The contractor is responsible to control our recommendations based on preliminary tests, and to provide the necessary conditions for appropriate incorporation of the product. We accept no liability for damages caused by improper workmanship. For further information ask for the product safety data sheet.


Download Liquidur installation guide

Back