Durostone
Industrial flooring systems
Industrial flooring systems
MICROPRIMER is a one component, low viscosity, 100% aliphatic polyurethane based primer, it is ideal as a primer for DUROFLEX sealants. It is characterised by its very low viscosity, excellent impregnation, non- yellowing (non-staining) properties combined with a relatively fast cure speed and most importantly its excellent adhesion on both non-porous and porous substrates.
To be used as primer for:
Also, for use as concrete sealer.
50 – 200 g/m2, depending on the substrate porosity.
Clean the surface using a high pressure washer, if possible. Remove oil, grease and wax contaminants. Cement laitance, loose particles, mould release agents, cured membranes must also be removed. Apply with brush or roller depending on the surface to be primed at a consumption of 50-200 g/m2. Ensure primer has cured before applying main sealant.
After use the tools can be cleaned with paper towel and then xylene or solvent nafta. Rollers may not be reusable.
Application temperature range between + 5 oC and + 30 oC.
In liquid form (before application):
Characteristic | Values | Remarks |
Viscosity (Brookfield) | 20 mPas | ASTM D2196-86 @ 25 oC |
Density @ 20 oC | 0.9 -0.95 g/cm3 | ASTM D1475 / DIN 53217 / ISO 2811 |
In cured form (after application):
Characteristic | Values | Remarks |
Touch dry on dry cement | 6 hours | DIN 52455 / EN-ISO-527-3 |
Tensile strength | 400 Kg/cm2(40 N/mm2 | ASTM D412 / EN-ISO-527-3 |
Elongation @ 23 oC | >50% | DIN 52455 |
Adhesion to cement | 4 mPa | ASTM D1640 |
Supplied in 1 and 4 liter cans.
May be stored for up to 12 months in its original packaging in a dry area at ambient temperature between 5°C and 25°C. After opening apply it soon as possible.
Contains volatile flammable solvents. Apply in well-ventilated, no smoking areas, away from naked flames. In closed spaces use ventilators and carbon active masks. Keep in mind that solvents are heavier than air so they creep on the floor. For further information ask for the safety data sheet.
Legal notice:
This technical datasheet and installation guide are based in laboratory results and our experiments. The amount of material used and the given application process can be affected by the specific construction conditions. The contractor is responsible to control our recommendations based on preliminary tests, and to provide the necessary conditions for appropriate incorporation of the product. We accept no liability for damages caused by improper workmanship. For further information ask for the product safety data sheet.
Safety datasheet